I have a Canon MP490 printer and I replaced the iNK, but it still says it is out of ink? - How do I correct? I have a Canon MP490 printer and I replaced the iNK, but it still says it is out of ink? :: Ask Me Fast

I have a canon mp490 printer and i replaced the ink, but it still says it is out of ink?

How do I correct? I have a Canon MP490 printer and I replaced the iNK, but it still says it is out of ink?

Topic:
Asked by: dufflmbs
In Computers & Internet > Printers > Canon

Suggested Solutions (9)What's this?

scheerchrs1

Level 1 (Contributor)
1 Answer

Depending upon the printer, you may be able to reset the ink monitoring or disable it entirely by pressing and holding down the reset button for 5 or 10 seconds; some Windows versions also have the ability to disable ink level monitoring right in the OS. It`s just a nuisance message; most manufacturers use internal chips in the ink cartridges to try to prevent folks from refilling them. They make money on cartridges, not printers.

source: I replaced my factory ink cartridge with a store brand equivalent but my printer still says i am low on ink?

Was this answer helpful? Yes | No

 Someone said: I have a MP490 Canon abd I held down the "STOP" Button and it now is GOOD to Print

Was this comment helpful? Yes | No

 Someone said: Yes I held down the "STOP" Button and it work gfood now, Thank You  canon MP 490  , 210 & 211

Was this comment helpful? Yes | No

Comment

Report

chrissy.greenbe

Level 1 (Contributor)
1 Answer

1. Start with printer off 2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on 3. hold the Power button, release Resume Button. 4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons. 5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber). 6. Turn off the printer and turn on again.

source: Flashing low black ink, have replaced but still flashing and won`t print?

Was this answer helpful? Yes | No

 Xiangneng3201  said: um sorry not clear...

Was this comment helpful? Yes | No

 Someone said: This seems to be for another printer.  Green LED does not show 3, it shows 1.  The buttons cause quite different behavior on the printer, and the Black Ink light stays flashing orange.

Was this comment helpful? Yes | No

 Someone said: `It works.. tnx a lot :)

Was this comment helpful? Yes | No

 Someone said: no this method is not working in my canon mp237 printer.

Was this comment helpful? Yes | No

 Someone said: Thank you, it works in my printer :)

Was this comment helpful? Yes | No

 Someone said: is your printer canon ip 2700?

Was this comment helpful? Yes | No

 Someone said: Didn`t work on mine. :-(

Was this comment helpful? Yes | No

 Someone said: hello any theres any body can help with my printer canon model ip2770 , I refilled already and it works but theres no ink out.. can you help me plss

Was this comment helpful? Yes | No

 Someone said: After i did the above steps now the printer is not getting on anymore. something was rewrited in it and is not starting anymore. this is sucks

Was this comment helpful? Yes | No

 Someone said: not working for my cannon pixma3250

Was this comment helpful? Yes | No

 Someone said: DO NOT FOLLOW THOSE STEPS - YOUR PRINTER WILL NO LONGER WORK!!!!!!

Was this comment helpful? Yes | No

 Someone said: DO NOT FOLLOW THESE STEPS - YOUR PRINTER WILL BE PROGRAMMED TO STOP WORKING!!

Was this comment helpful? Yes | No

Comment

Report

bonuscolm87

Level 1 (Contributor)
2 Answers

Is it an original or reill ink cartridge? Sounds like the chip in it is faulty so I would bring it back for a replacement. http://www.inkandtoner.ie/inkjet-cartridges-s/1819.htm.

source: I`ve replaced new black cartridge in my printer hp f4488. now even after several tries, it is not being detected and error is being shown?

Was this answer helpful? Yes | No

Comment

Report

Anonymous

The cannon series of printer are best used printers in the world of printers today. most people use them for both purposes i.e for the office and the home use. you can get the ink for the cannon printer from the market and easily get the genuine cannon printer ink for that. Always use the good ink. Bill.Gagnon.

source: What ink do i need for my canon printer?

Was this answer helpful? Yes | No

Comment

Report

Anonymous

The particular ink that you will need will depend upon the exact configuration i.e. the model number etc of your canon printer. But make sure that you buy only compatible and original canon ink for you canon printer because cheap or duplicate ink could spoil your printer. Bill Perry.

source: What ink do i need for my canon printer?

Was this answer helpful? Yes | No

Comment

Report

h.baldawi

Level 1 (Contributor)
2 Answers

H.baldawi: I refille my printer ink for canon 250 ( canon 210 & Canon 211) but the printer doesnt work? I refille my printer ink for canon 250 ( canon 210 & Canon 211) but the printer doesnt work.

source: I refille my printer ink for canon 250 ( canon 210 & canon 211) but the printer doesnt work?

Was this answer helpful? Yes | No

Comment

Report

Anonymous

In order to put the ink in canon printer ,the person needs to read the manual carefully, which he must have received with the canon printer .The whole process of filling ink must be given in manual. Follow the instructions to put in the ink in canon.

source: How to put the ink in canon printer?

Was this answer helpful? Yes | No

Comment

Report

janusmercado

Level 1 (Contributor)
2 Answers

I dont know the answer that is why i am asking too.

source: My canon mp490 hasn`t run out of black ink, but it keeps telling me to replace the cartridge?

Was this answer helpful? Yes | No

Comment

Report

tvillaruel

Level 1 (Contributor)
2 Answers

My computer/printer keep saying error.

source: I have a canon pixma mp250, i recently replaced the ink cartridge and now it is saying e04,e05 error) which means it does not recognize the cartridge ?

Was this answer helpful? Yes | No

Comment

Report

Add Your Answer

I have a canon mp490 printer and i replaced the ink, but it still says it is out of ink?

How do I correct? I have a Canon MP490 printer and I replaced the iNK, but it still says it is out of ink?

We need your help! Please help us improve our content by removing questions that are essentially the same and merging them into this question. Please tell us which questions below are the same as this one:

Ask Your Question Fast!

Leader BoardWhat's this?


Leading Today	Pts	Helpful


Leading this Week	Pts	Helpful


Leading this Month	Pts	Helpful

Daniel:	Hi, my name is Daniel.
Daniel:	Can I connect you with a community expert to help you with your questions?

E-Mail:
Username:
Password:
Re-Type Password:

Or use an existing account

You must be logged in to perform this action.
Please login or register a new account.

Create an account

	Daniel Community Expert Coordinator Level: Gold Positive Feedback: 92.7%
Daniel is a chat coordinator with Ask Me Fast - UK. Daniel matches your request with our community of online experts. Daniel has achieved "Gold" level status, the highest overall rating possible. Daniel has a positive feedback rating of 92.7%

Or use an existing account

You must be logged in to perform this action. Please login or register a new account.

Create an account

You must be logged in to perform this action.
Please login or register a new account.